タグ:swabs

Cleanmo’s CM-FS750 Kleentips Anti-static Cleanroom Swab is constructed from compressed, 100 ppi (Z) open-cell polyurethane foam that is free from organic contaminants such as silicone, amides or phthalate esters. The foam is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an ISO Class 4 Cleanroom, the foam exhibits low particulate and ionic content. It has excellent compatibility with most common solvents including acetone as well as excellent absorbency and solvent-holding capacity.


The foam head is compressed and possesses good firmness. The pointed,non-abrasive foam head is designed for cleaning small, slotted areas.The swab handle is ESD-safe and is made from polypropylene. The handle is compact and will not contribute to particulate or organic contamination. Designed for general purpose cleaning, Cleanmo CM-FS750 Anti-static Cleanroom Swabs are the ideal swabs to use in cleaning static sensitive components or parts.


Features:


- Free from silicone, amide and DOP
- Low non-volatile residue
- Low in both particles and ion content
- Excellent solvent-holding capacity
- Compatible with most common solvents
-No contaminating adhesives or coatings


Applications:


-Micro-mechanical cleaning
- Remove contamination from disk drives
- Effectively clean small, hard to reach areas with solvents such as IPA
- Remove flux residue and excess materials
- For general purpose cleaning

 

Packaging: 500 swabs /bag, 5 inner bags of 100 swabs, 50bags/ctn


Specifications

1.Good substitute for Texwipe swab 
2.Seagate supplier 
3.Antistatic Swab for electronics 
4.No MOQ 
5.Cetificated by SGS 

Antistatic Swab For Electronics
 
Description:
 
Shenzhen Cleanmo Technology Co., Ltd. has been actively engaged in the manufacture of Anti-static Cleanroom Swabs , our Anti-static cleanroom swabs are very good substitute for ITW Texwipe swabs .All the test parameters and technical indicators are in line with the requirement of the Hard Disk industry ,free from silicone, amides or DOP, low in both particles and ion content ,it also can be used with 99.9% industry IPA .
CM-PS761M are constructed from compressed , microfiber head and polypropylene handle . They are free from organic contaminants such as silicone ,amide or DOP.Laundered and packed under an ISO Class 4 Cleanroom,and the polyester head used hot seal edge that is free from particle .Abrasion ,Chemical resistant and has excellent  absorbency . 
 
Specifications:
-Head Material:microfiber
-Head width: 7.5mm
-Head thickness: 3.0 mm
-Head length: 16 mm
-Handle Material:polypropylene
-Handle width: 3.2 mm
-Handle length: 148 mm
-Total length: 164 mm
 
Features :
-Free from silicone, amide and DOP
-Low non-volatile residue
-Low in both particles and ion content
-Excellent solvent-holding capacity
-Compatible with most common solvents 
-No contaminating adhesives or coatings.
 
Advantage:
1.The 100ppi open-cell sponge or polyester head have excellent absorbency and cleaning affect.
2.The polypropylene handle has excellent ESD performance ,it can protect the sensitive components or parts .And the handle won’t produce any particle when it is using.
 
Applications
-Micro-mechanical cleaning
-Effectively clean small slotted. recessed areas
-Remove flux residue and excess material
-Use in the cleaning static sensitive components parts
-Used in the electronics, semiconductor, hard disk drive, LCD,PCB,SMT, IC, medical and biotech industry .
 
Packing Info:
500swabs/bag, 10bags/ctn

Specifications:

1.Good Cleaning Swab for e-cigarettes
2.Alcohol swab 4.5" handle with IPA
3.Factory direct price


1. Introduction:

 Cleaning Swab for e-cigarettes 

 
SNAP Swabs 4.5"  IPA Filled Reservoir Handle  for  cleaning e-cigarettes is easy, self-saturating foam-tipped cleaning swab is the newest and easiest way to thoroughly clean e-cigarettes. Cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past. To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip. The user then runs the swab over the print head until it is clean.

 
* Self-saturating foam tip

* Reduces residue build-up without dismantling equipment

* Quick, easy, inexpensive preventative maintenance


2. Specification:

 

Foam Tip

Urethane

Handle material

Polypropylene

Foamtip dimension (length×diameter)

0.984” ×0.591” or 25mm×15mm

Handle dimension (length×diameter )

4.5” ×0.2” or 114mm×5.2mm

Fill Content

IPA Solution

Solution volume

 4.5"    (2.0 ml)

 

 

Recommended Usage: As often as necessary. Original Equipment Manufacturers recommend at least every time you feel stuck.

Directions: Remove swab from package. Place swab stem between thumb and index finger to “Snap”. Solution will saturate throughout foam tip. Wipe across print head 6-8 times and dispose of properly.

Shenzhen Cleanmo Technology Co., Ltd. and Cleanmo International ( HK ) Co., Limited have been actively engaged in the manufacture of Cleanroom, Esd Consumables, Static Control Products and Industrial and Hospital Consumables. Our products are used in the electronics, semiconductors, Hard disk drives, Optics-electronics, TFT-LCD, IC, SMT and PCB and medical, pharmaceutical, food processing and biotech industries.

Cleanmo group has an extensive products range, We are continually striving to update and develop new products across these scopes, therefore offering our customers superior quality products of up to the minute technological design at cost effective prices. Our main business are Cleanroom Foam swabs,Polyester Swabs,Microfiber Swabs, Cleanroom PE/PO bags ,Cleanroom wipes, Cleaning Cards,Zebra Cleaning Kits,Sticky mat and etc.

TESTING AND STATISTICAL ANALYSIS
We are using our latest FTIR, IC and LPC test equipment, operated by experienced and qualified QA engineers. ALL critical aspects of contamination control are tested for; NVR, ION CONTAMINATION, ABSORBENCY, PARTICLE COUNT and EXTRACTABLES. In the pipeline is also our envisioned project to tap the information pathway and post test reports of each delivery onto our web site.

Cleanmo Cleanroom and ESD Swabs are very good substitute for ITW Texwipe Swabs with better quality and much lower price.

Our clients include Seagate, Belton, Hitachi, Foxconn, Sony, Sharp, Flextronics, Olympus and etc., Now, world economy is suffering from the influence of the financial crisis, every company try to reduce the production cost, I think it is a good chance for your business picking up just begin our cooperation.


Address: Room 511,5/F,Huafeng XinAn Business Building,BaoAn 45 District,Shenzhen,Guangdong Province,518101 China

Tel: +86 755-29455975
Fax: +86 755-61605135
Contact: Mr Allen

Website: http://www.cleanmo.com
Email: dannys@cleanmo.com

↑このページのトップヘ